Local Council Crossover: Joondalup
Joondalup is within the City of Joondalup. The City does not currently require an application for a standard modification to an existing crossover, but every change must comply with its Crossover Guidelines. A proposal that varies from those guidelines requires Planning Services approval. Send a plan or sketch to the City when technical confirmation is needed.
Note on fees: Subsidy and assessment arrangements can change. Check the City's current verge and crossover page before relying on a contribution or timeframe.
Official source: City of Joondalup: verges and crossovers (reviewed 16 August 2026)
Ground conditions in Joondalup
Joondalup sits on Bassendean sand. The same well drained, nonreactive ground that runs down the coastal plain. Standard slab spec (100mm, SL72 mesh, 100mm base) performs reliably. The variable in Joondalup is what's under old driveways: 1980s driveways were sometimes poured over inadequate base or without reinforcement, and when they come out for replacement the ground may need remediation before the new pour. Test dig or expose the base after demolition before finalising the new slab spec.
Housing stock and typical jobs
Joondalup housing is majority 1980s–1990s build on 500–800m² blocks. Bigger blocks than the newer growth corridors, with well established front yard gardens and mature street trees. The concrete work profile is dominated by: driveway replacement (original 1980s driveways reaching end of life), resurfacing where the base is sound but the surface tired, alfresco extensions to accommodate outdoor living lifestyle changes, and pool surround refresh work. New pours are less common than in growth corridors; replacement and refresh work dominates.
Concreting services most in demand in Joondalup
Neighbouring suburbs we also cover
- Kingsley
- Edgewater
- Currambine
Ready to plan your Joondalup concrete job?
Tell us about your job. We'll be in touch within 24 hours.
Joondalup concreting FAQ
Should I replace or resurface my old Joondalup driveway?
Depends on the underlying slab condition. If the slab is structurally sound (no settlement, no active cracking over 3mm, adequate thickness) but the surface is tired, stained or dated, resurfacing at $55–$130 per m² is dramatically cheaper than replacement at $80–$220 per m². If the slab has settled, has active cracks, or was underdesigned for current use, replacement is the better call. Get an honest assessment before committing. An ethical concreter will tell you which is appropriate.
How much does driveway replacement cost in Joondalup?
For a 40m² driveway typical of Joondalup blocks, replacement in exposed aggregate runs $5,500–$7,500 including demolition and disposal of the old slab. Resurfacing the same driveway with a polymer modified overlay runs $3,200–$5,000. Choose replacement if the base is failing, resurfacing if it's just the surface that's tired.
Is the City of Joondalup process different for replacement vs new pour?
Similar application process, but replacement of an existing crossover to the same dimensions is often faster to approve because the City has records of the original approval. New crossovers or crossovers changing width or position go through full application. Ask your concreter to check whether your job qualifies for the streamlined replacement approval.
Get a free estimate for your Joondalup job
Tell us about your job. We'll be in touch within 24 hours.